Brinno Solar Power Kit
The Brinno Solar Power Kit is specifically designed for the Brinno BCC2000 & BCC2000 Plus construction camera bundles. It includes a 10W monocrystalline silicon solar panel with higher conversion efficiency and the Brinno Rechargeable Battery kit. It generates a continuous power supply for the time-lapse camera through direct sunlight.
The solar panel is designed to be weather resistant and comes with a 9.8-foot (3 meter) USB-C power cable. Additionally, it features an adjustable mount for easy installation in any location. The rechargeable battery kit includes a 12,600 mAh/ 45.4 Wh rechargeable battery pack and an external power adapter. It is specifically designed to be compatible with the Brinno BCC2000 & BCC2000 Plus construction camera bundles and perfectly fits the original power housing (BNATH2000). This kit supports continuous power supply for long-term time-lapse recording.
1. 10W solar panel with a rechargeable battery kit.
2. A 12,600 mAh / 45.4 Wh battery pack.
3. Designed for continuous operation for time lapse recording.
4. Compatible with Brinno BCC2000 & BCC2000 Plus.
5. Operating temperature range: -4 °F ∼ 140 °F (-20°C to 60°C).
6. The solar panel is waterproof with an IP65 rating.
|TLC2020 single and bundles||YES (requires ATH2000 power housing)|
|TLC120/TLC130||YES (requires ATH2000 power housing)|
What's in the Box?
|Solar Panel (ASP1000)
1. 10W Solar Panel
2. Holder & Wall Mount
3. Mounting Adapter
Rechargeable Battery Kit (APB1000)
Product / Model NO. Solar Panel / ASP1000
Solar Power Rating 10W
Operating Voltage 5V DC
Power Connection USB-C
Conversion Rate >20%
Works With Brinno Rechargeable Battery Kit (APB1000)
Size (WxHxD) Solar Panel: 8.4 x 10.3 x 0.8 in (214 x 262 x 20 mm)
USB-C Cable: 9.8 ft (3 m)
Weight 23.2 oz (660 g)
Product / Model NO. Rechargeable Battery Kit / APB1000
Power Source Brinno Battery Pack (MRB1000)
Energy Capacity 12,600 mAh/ 45.4 Wh
Always-On Mode Provides continuous power supply for
low power time lapse camera or IoT application.
Solar Panel Requirement
Output wattage: 5W (minimum), 5V
Input Port USB-C (support 5V 2A quick charger) (on battery pack)
Micro USB connector (for Brinno camera)
& Output Current
5V 2A (max. for total two output)
Micro USB: continuous output 5V 500mA
(Max instantaneous output 5V 1A)
USB-C: continuous output 5V 1A
BCC2000 & BCC2000 Plus
TLC2000/2020 with ATH2000 construction power housing
Ambient temperature -4 °F ∼ 140 °F (-20 °C ∼ 60 °C)*
Size (WxHxD) 3.68 x 3.22 x1.46 in (93.5 x 82 x 27.2 mm)
Weight 9.9 oz (280 g)
Package Contents Brinno Battery Pack (MRB1000) x1;
External Power Adapter;
Hook and Loop Tape
NOTE: Built-in short circuit protection when over charge, over discharge, over temperature (45℃ Input Cutoff, 60℃ Output Cutoff), under temperature (0℃ Input Cutoff, -20℃ Output Cutoff)